Wave Link can be controlled by Stream Deck using the Wave Link integration.
The Wave Link integration requires Stream Deck 4.8 or later. You will have to separately download the latest Stream Deck software here:
https://www.elgato.com/en/gaming/downloads
Installing the Wave Link Integration
1) Open the Stream Deck app
2) Click on More Actions... at the bottom right of the Stream Deck app
3) Scroll through the integration list or use the search in the upper right hand side and look for Wave Link
4) Click on Install
After the Wave Link integration is installed a prompt will appear asking if a pre-made profile should be installed.
This pre-made profile will read the inputs currently setup in Wave Link and automatically add them in a pre-configured layout with icons onto the Stream Deck.
Example layout of the preconfigured profile on a Stream Deck XL
Mute Input
Allows you to Mute or Unmute the select audio input. This action will also display the mute status and the volume level.
Input: Select the input which will be muted
Output: Select which output mix the input will be muted in - Monitor, Stream, or All (Both)
Adjust Input Volume
Increase or decrease Input Volume in increments of 5, 10, 15, 20, or 25 per key press.
Input: Select the input that will be adjusted
Output: Select whether the adjustments are made to the Monitor Mix, Stream Mix or both mixes at the same time (All).
Step Size: Select the step size that the audio level is adjusted by when the key is pressed
Mute Output
Mute the output of the monitor mix or stream mix.
Output: Select which output mix to mute - Monitor, Stream or both mixes (All)
Adjust Output Volume
Increase or decrease Output Mix Volume in increments of 5, 10, 15, 20, or 25 every key press
Output: Select which output will be adjusted - Monitor, Stream or both mixes (All)
Step Size: Select the step size that the audio level is adjusted by when the key is pressed
Switch Monitoring
Switch between listening to the Monitor or Stream Mix.
Microphone Settings
Adjust microphone settings:
• Adjust Gain
• Set Gain
• Adjust Output Volume
• Set Output Volume
• Adjust Mic/PC Mix
• Set Mic/PC Mix
• Toggle Lowcut
• Toggle Clipguard
