This article covers the setup for EpocCam, for both macOS and Windows.
Contents
- System requirements
- EpocCam / EpocCam Pro App Requirements
- Windows setup
- macOS setup
- More information
System requirements
Windows:
- Windows 10/11 64-bit or later
- Note: USB connection mode requires iTunes to be installed.
Mac:
- macOS Big Sur 11.0 or later
Software:
- Camera Hub 1.4 or later
EpocCam / EpocCam Pro App Requirements
Operating System:
- iOS 13 or later.
- iPadOS 13 or later.
iOS Compatible Devices:
- iPhone 16 Plus
- iPhone 16 Pro
- iPhone 16 Pro Max
- iPhone 16
- iPhone 15 Plus
- iPhone 15 Pro
- iPhone 15 Pro Max
- iPhone 15
- iPhone 14 Plus
- iPhone 14 Pro
- iPhone 14 Pro Max
- iPhone 13 mini
- iPhone 13
- iPhone 13 Pro
- iPhone 13 Pro Max
- iPhone 12 mini
- iPhone 12
- iPhone 12 Pro
- iPhone 12 Pro Max
- iPhone 11
- iPhone 11 Pro
- iPhone 11 Pro Max
- iPhone Xs
- iPhone Xs Max
- iPhone Xr
- iPhone X
- iPhone 8
- iPhone 8 Plus
- iPhone 7
- iPhone 7 Plus
- iPhone 6s
- iPhone 6s Plus
- iPhone SE (2nd generation)
- iPhone SE (1st generation)
- iPod touch (7th generation)
iPadOS Compatible Devices
- iPad Pro 11-inch (4th generation)
- iPad Pro 11-inch (3rd generation)
- iPad Pro 11-inch (2nd generation)
- iPad Pro 11-inch (1st generation)
- iPad Pro 12.9-inch (6th generation)
- iPad Pro 12.9-inch (5th generation)
- iPad Pro 12.9-inch (4th generation)
- iPad Pro 12.9-inch (3rd generation)
- iPad Pro 12.9-inch (2nd generation)
- iPad Pro 12.9-inch (1st generation)
- iPad Pro 10.5-inch
- iPad Pro 9.7-inch
- iPad (10th generation)
- iPad (9th generation)
- iPad (8th generation)
- iPad (7th generation)
- iPad (6th generation)
- iPad (5th generation)
- iPad mini (6th generation)
- iPad mini (5th generation)
- iPad mini 4
- iPad Air (5th generation)
- iPad Air (4th generation)
- iPad Air (3rd generation)
- iPad Air 2
Windows setup
1) Install Camera Hub from elgato.com/downloads.
2) Follow the Elgato Camera Hub Setup Wizard.
3) Click the Finish button to exit the Setup Wizard.
EpocCam — Wireless Setup (Windows)
1) Install EpocCam on your iOS device.
2) Open EpocCam on your iOS device.
3) Open Camera Hub.
4) Once EpocCam is detected, you'll be able to select the Camera, Bit Rate, Zoom, Picture settings, Snap Lenses, and more.
ℹ️ If the connection cannot be established, open Windows Service and check if the Bonjour Service is running and the Connection mode is set to Wireless or Auto.
EpocCam — Wired Setup (Windows)
1) Install Apple Devices from the Windows Store.
2) Restart your PC after installing Apple Devices.
3) Install EpocCam on your iOS device
4) Connect your iOS device to the PC using Lighting or a USB-C cable.
5) Open Camera Hub.
6) Once EpocCam is detected, you can select the Camera, Bit Rate, Zoom, Picture settings, Snap Lenses, and more.
ℹ️ If the connection cannot be established, try moving to a different USB port.
The full setup guide for Windows can be found here.
macOS setup
1) Install Camera Hub from elgato.com/downloads.
2) Follow the Elgato Camera Hub Setup Wizard.
3) Once the installation is successful, you can move the installation file to the trash.
EpocCam — Wireless Setup (macOS)
1) Install EpocCam your iOS device.
2) Open EpocCam on your iOS device.
3) Open Camera Hub.
4) Once EpocCam is detected, you'll be able to select the Camera, Bit Rate, Zoom, Picture settings, Snap Lenses, and more.
ℹ️ If the connection cannot be established, check the Connection mode is set to Wireless or Auto.
EpocCam — Wired Setup (macOS)
1) Install EpocCam your iOS device.
2) Connect your iOS device using Lighting or a USB-C cable.
3) Open Camera Hub.
4) Once EpocCam is detected, you'll be able to select the Camera, Bit Rate, Zoom, Picture settings, Snap Lenses, and more.
ℹ️ If the connection cannot be established, try using another cable or moving to a different USB port.
The full setup guide for macOS can be found here.
More information
You can find more information about EpocCam in this section:
We'd like to hear from you about if this article was helpful or not. Leave your feedback here.