This article will guide you on setting up Xbox Series X or S capturing with Elgato 4K60 Pro MK.2
This guide can be viewed in video format below:
Items Needed for Setup
Xbox Series X or Series S console.
Desktop PC with the 4K60 Pro MK.2 installed in available PCIe 2.0 or higher (x4/x8/x16) slot.
Desktop PC with the 4K60 Pro MK.2 installed in available PCIe 2.0 or higher (x4/x8/x16) slot.
Two HDMI cables, one of which is provided with the 4K60 Pro MK.2.
TV or monitor for passthrough
TV or monitor for passthrough
Note: To capture 4K60 HDR with 4K60 Pro MK.2, a 4K60 HDR capable TV or monitor is required. To use 1440p 120hz, a 1440p 120hz capable TV or monitor is required.
Setup Steps
1) Plug one end of an HDMI Cable into the HDMI OUT port of the Xbox Series X/S.
2) Plug the other end of this cable into the HDMI IN port of the 4K60 Pro MK.2.
3) Plug one end of the second HDMI cable into the HDMI OUT port of the 4K60 Pro MK.2.
4) Plug the other end of this cable and plug it into an HDMI IN port of your TV/Monitor.
Troubleshooting - No Audio is Captured
4K60 Pro MK.2 hardware can't capture Dolby, DTS or other multichannel digital audio formats. It can capture standard stereo audio.
Stereo audio may be called Linear PCM.
When using 4K60 Pro MK.2, Linear PCM is the correct audio setting for the Xbox Series X/S
Capturing 1440p120
4K60 Pro MK.2 can capture and passthrough 1440p120 from Xbox Series X/S.
A TV or monitor that supports 1440p120 is required.
1440p120 resolution and frame rate format does not support HDR as part of the HDMI specifications.
If any assistance is needed, feel free to contact us through the widget at the right.